Follett ice machine empty drip tray error

Follett ice machine empty drip tray error is a common issue faced by users. When this error occurs, it indicates that the drip tray is full or not properly installed. To resolve this problem, make sure to empty the drip tray and ensure it is securely in place. Regularly checking and maintaining the drip tray can help prevent this error from recurring.

When encountering the Follett ice machine empty drip tray error, several factors could potentially be causing this issue. Some possible causes to consider include:

• Incorrect Positioning: The drip tray may not be properly aligned or inserted in the correct position.
• Clogged Drain Line: Blockages in the drain line can prevent water from draining into the tray, triggering the error.
• Defective Sensor: A malfunctioning sensor may inaccurately detect that the drip tray is empty, leading to the error message.
• Overflowing Tray: If the tray is overflowing with water, it might trigger the error as well.
• Electrical Issues: Problems with the electrical connections or components related to the drip tray sensor could also be a potential cause.

To resolve the Follett ice machine empty drip tray error, follow these steps:

1. Turn off the ice machine: Start by powering off the Follett ice machine to prevent any mishaps during the troubleshooting process.
2. Inspect the drip tray: Check the drip tray for any obstructions or debris that might be causing the system to register it as empty. Clean the tray thoroughly to ensure proper functioning.
3. Reset the machine: After cleaning the drip tray, reset the ice machine by turning it back on. This process sometimes resolves the error by recalibrating the sensors.
4. Check sensor alignment: Ensure that the sensors detecting the drip tray’s status are properly aligned and not damaged. Adjust them if needed to ensure accurate readings.
5. Call for service: If the error persists after checking all these steps, contact Follett’s customer service for further assistance or to schedule a service visit to diagnose the issue professionally.

Follett ice machine is displaying an empty drip tray error. This message indicates that the drip tray needs attention. To resolve this issue, check the drip tray for any blockages or obstructions. Ensure it is properly aligned and empty. Restart the machine and monitor for the error message. Regularly cleaning and maintaining the drip tray will help prevent this error from recurring.